| TC Vietnam | High Temperature Industrial Ceramic Sheathed Thermocouples |
| Specification as for item 1, except type K, 200mm long, impervious aluminous porcelain sheath (1400°C.) |
| *** Please check the length here as typically only 100mm of ceramic sheath will be visible (plus 100mm stainless steel support tube) and this might be too short for the process involved. |
| Order Code: 14-K-1-12-IAP-200-3P11 |
| TC Vietnam | High Temperature Industrial Ceramic Sheathed Thermocouples |
| Specification as for item 2, except 500mm long, 20mm dia. sheath. |
| Order Code: 14-K-1-12-IAP-500-3P11 |
| Tongchuang Vietnam | XWR-2121 |
| K; 0~10000C |
| Tongchuang Vietnam | XWR-2121 |
| K; 0~8000C |
| Tongchuang Vietnam | XWR-2121 |
| K; 0~13000C |
| Tongchuang Vietnam | XWR-2121 |
| K; 0~6000C |
| Toshiba Vietnam | Toshiba Inverter |
| Part no: VFNC3s-2007PL |
| 1phase |
| Tungli | YS200W-4P, IP = 44 |
| (YS-200W-4P) |
| Gear motor :20/1,RPM:50Hz-75,60Hz- |
| ***Output shaft 18mm |
| Standing type |
| Tantronic Vietnam | Part.-No. 00-66-33258 |
| 00-66-33258-A- Pre Suction Pump Block 24V ATEX |
| Air samples from two individual sampling points |
| at one time are extracted in parallel by a pair |
| of suction pumps connected to a solenoid |
| valve which directs each sample (one after |
| the other) through the sampling line to the gas |
| sensor in the analyser unit. This configuration |
| minimizes the time between samples since there |
| is always one sample in the queue waiting to be |
| analysed. |
| A solenoid valve block cyclially switches from |
| the suction up presuchtion pump and handles |
| the calibration function. |
| Technical data: |
| Type of device: Pre-suction Pump Block ATEX |
| Power supply: 24V DC |
| Power cons: 70W |
| Operating temp.: 0-60°C |
| Rating: IP54 DIN 60 529 / 10.91 |
| Dimensions: 500x400x130mm(LxWxH) |
| Wight: 55Kg |
| Material: Stainless Steel 1.5mm |
| Connections: Swagelok connections 3/8'' or 10mm |
| to the Panel: PA hose 8mm |
| Cal. Gas: PA hose 6mm |
| Technical date Pumps: |
| Type: Double chamber diaphragm pumps |
| Power supply: 24V DC |
| Power: app. 2x1.0A |
| Max. fl owrate: 10L/min. (unloaded) |
| Technical date Valves: |
| Type: 2/3-Way Valves |
| Power supply: 24V DC |
| Power: app. 0.3A |
| Technical date Filter: |
| Particle separation from gases and liquids |
| without fi ber abrasion. |
| Material: Filter layer Polycarbonat |
| Metal Box C3SF |
| Separation |
| achievement: 75 to 99,9998 % |
| Air fl ow: 0,9 m³/h (0,2 m/s air) |
| Differential pressure: max. 0.5 bar |
| Technical date Flame barrier: |
| Material: brass / Stainless Steel |
| Pressure: max. 1.1 bar |
| Operating temp.: max. 60°C |
| Connections: G 1/4" |
| Suitable for the |
| following media: Explosion group II A |
| ATEX: PTB 99 ATEX 4022x IIG |
| Standard: DIN 12874 |
| EN 60079 - 14 |
| (Presuction Pump Block |
| Art No: 31485 |
| Type” Presuction Pump |
| Power Supply: Standard 24VDC |
| KKS No: CYQ01AP111) |
0 nhận xét:
Đăng nhận xét